11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
Previous | 6 / 12 | Next |
Units | GXS160 | GXS160/1750 | |||
Peak Pumping Speed | m3h-1 (cfm) | 160 (94) | 1200 (706) | ||
Ultimate Pressure (without purge) | mbar (Torr) | 7x10-3 (5.3x10-3) | 7x10-4 (5.3x10-4) | ||
Full Load Power | @ ultimate pressure | kW (hp) | 3.8 (5.1) | 5.1 (6.8) | |
@ peak pumping load | kW (hp) | 5.0 (6.7) | 7.4 (9.9) | ||
Electrical | Supply options | High volt | 380-460V 3Ø 50/60Hz | ||
Low volt | 200-230V 3Ø 50/60Hz | ||||
Connection | High volt | Harting Han K 4/4-F | |||
Low volt | |||||
Vacuum Couplings | Inlet | ISO63 | ISO100 | ||
Exhaust | NW40 | ||||
Cooling Water | Supply pressure (max) | bar (psig) | 6.9 (100) | ||
DP across pump (min) | bar (psig) | 1.0 (14.7) | |||
Flow @ min DP | lmin-1 (gal/min) | 4.0 (1.1) | 7.0 (1.9) | ||
Temperature | °C (°F) | 5-40 (41-104) All variants | |||
Connection | 3/8" BSP Male (G 3/8”) | ||||
Purge Gas* | Pressure | bar (psig) | 2.5-6.9 (36-100) | ||
Light Duty | sl/min | 12 | |||
Medium Duty | sl/min | 18-52 | |||
Connection | Swagelok® Ø ¼” tube with olive | ||||
High Flow Purge/ Solvent Flush | Supply pressure | bar (psig) | 2.5-6.9 (36-100) | ||
Control valve connection | Swagelok® Ø 3/8" tube with olive | ||||
Filter connection | ½" NPT Male | ||||
Solvent connection | 3/8" BSP Male (G 3/8") | ||||
Mass | kg (lbs) | 305 (672) | 475 (1047) | ||
Noise (with suitable exhaust pipe) | dB(A) | <64 | |||
Operating Temperature | °C (°F) | 5-40 (41-104) | |||
Exhaust Back Pressure (MAX) | mbar (psia) | 1400 (20) | |||
System IP rating | Standard | 31 | |||
Lubrication | Type | PFPE Drynert® 25/6 | |||
Volume | l (gal) | 0.7 (0.2) | 1.4 (0.4) | ||
Monitoring & Control |
Standard | Control |
Front panel "Dashboard" Serial - RS232 |
||
Monitoring | Ethernet Webserver | ||||
Option | Control | Parallel - MCM MicroTIM | |||
Control & Monitoring |
Profibus DP Pump Display Terminal (PDT) |
||||
Monitoring | FabWorks® | ||||
*Pump combinations | Light duty | Shaft Seal Purge only | |||
Medium duty | Shaft Seal Purge, High Vac Purge, Inlet Purge, variable Gas Ballast & Exhaust Purge (with Exhaust Pressure Sensor) | ||||
Medium duty + | As Medium duty, plus High Flow Purge / Solvent Flush |